Formation of an intermetallic Ni3Al coating by cold spraying of a Ni-Al powder mixture mechanically processed in a planetary mill
Chesnokov A. E.
1, Smirnov A. V.
1, Drozdov V.O.
1, Skorokhod K. A.
11Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Email: chae@itam.nsc.ru, asmirnov_04@mail.ru, vo-va-1988@yandex.ru, skorokhod@itam.nsc.ru
The features of the formation of an intermetallic Ni3Al coating by cold spraying of a Ni-Al powder mixture mechanically processed in a planetary mill and prepared in a V-shaped mixer are presented. It is shown that the powder deposition efficiency is 1.5 times higher when coatings are obtained from a mechanically treated powder mixture of Ni and Al components. Subsequent high-temperature treatment in the furnace chamber creates a condition for the formation of an intermetallic compound of the Ni-Al system of various stoichiometric proportions. Keywords: cold spray, composite material, high-energy planetary mill, nickel, aluminium, titanium nitride, X-ray analysis.
- A. Papyrin, V. Kosarev, S. Klinkov, V. Fomin, Cold spray technology (Elsevier Science, 2006). DOI: 10.1016/B978-0-08-045155-8.X5000-5
- V.E. Ovcharenko, E.N. Boyangin, Inorg. Mater., 52 (7), 729 (2016). DOI: 10.1134/S0020168516070128
- K.B. Povarova, O.A. Bazyleva, A.A. Drozdov, N.K. Kazanskaya, A.E. Morozov, M.A. Samsonova, Materialovedenie, No. 4, 39 (2011) (in Russian)
- E.V. Galieva, Tverdofaznoe soedinenie intermetallidnogo splava na osnove Ni3Al i zharoprochnogo nikelevogo splava s ispol'zovaniem sverkhplasticheskoi deformatsii, Candidate's Dissertation in Engineering (Inst. Probl. Sverkhplast. Met., Ross. Akad. Nauk, Ufa, 2021) (in Russian).
- A.N. Cherepanov, V.O. Drozdov, V.I. Mali, A.G. Malikova, A.M. Orishich, Phys. Metals Metallogr., 122, 301 (2021). DOI: 10.1134/S0031918X21030030
- V.E. Ovcharenko, G. Lyu, E.N. Boyangin, in Proc. VI Int. Sci.-Pract. Conf. "Innovatsionnye tekhnologii i ekonomika v mashinostroenii" (Tomsk. Politekh. Univ., Tomsk, 2015), p. 134 (in Russian). http://www.lib.tpu.ru/fulltext/c/2015/C30/030.pdf
- S.G. Vadchenko, E.V. Suvorova, N.I. Mukhina, I.D. Kovalev, Izv. Vyssh. Uchebn. Zaved., Poroshk. Metall. Funkts. Pokrytiya, No. 1, 4 (2020) (in Russian). DOI: 10.17073/1997-308X-2020-4-10
- A.E. Chesnokov, A.V. Smirnov, V.F. Kosarev, S.V. Klinkov, V.S. Shikalov, Tech. Phys. Lett., 48 (7), 37 (2022). DOI: 10.21883/PJTF.2022.13.52744.1923
- A.E. Chesnokov, S.V. Klinkov, V.F. Kosarev, A.V. Smirnov, V.S. Shikalov, J. Appl. Mech. Tech. Phys., 63, 47 (2022). DOI: 10.1134/S0021894422010084.