Physics of the Solid State
To authors
Volumes and Issues
- 2024
- 2023
- 2022
Ti-Ni-Ta-based surface alloy synthesized on the TiNi-substrate through electron-beam method: structure and physical-mechanical properties
D'yachenko F. A.
1, Semin V. O.
1, Ostapenko M. G.
1, Meisner L. L.
1
1Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences, Tomsk, Russia
Email: dfa@ispms.ru, lpfreedom14@gmail.com, artifakt@ispms.ru, llm@ispms.ru
The structure and physical-mechanical properties of Ti-Ni-Ta-based surface alloy synthesized on the TiNi-substrate through additive thin-film electron-beam method have been studied. The synthesis of the surface alloy was carried out by 30-fold alternation of operations of deposition of a dopant film (Ti60Ta40 (at.%), ~50 nm thick) and liquid-phase mixing of the film/substrate using a pulsed low-energy high-current electron beam. It was found that Ti-Ni-Ta-based surface alloy, whose thickness is ~1.8 μm, has an amorphous structure. It has been established that the surface alloy has ~2 and ~1.5 times higher values of microhardness HOP and elastic modulus EOP compared to the initial TiNi-substrate, but parameter of plasticity deltah and shape recovery ratio eta close to the substrate. It is shown that the nature of the change in physical-mechanical properties in Ti-Ni-Ta-based surface alloy and the transition zone depends on the number and thickness of the sublayers, as well as on the structural states of the phases in the sublayers. The evaluation of the mechanical compatibility of the surface alloy with the TiNi-substrate is given. Keywords: Ti-Ni-Ta-based surface alloy, nickel titanium alloy, thin films, additive thin-film electron-beam synthesis, structure, physical-mechanical properties, strength and ductility parameters.
- J.J. Mohd, M. Leary, A. Subic, M.A. Gibson. Mater. Des. 56, 1078 (2014). DOI: 10.1016/j.matdes.2013.11.084
- V. Iasnii, P. Yasniy. Acta Mechanica Automatica 13, 95 (2019). DOI: 10.2478/ama-2019-0013
- Y. Say, B. Aksakal. J. Mater. Res. Technol. 9, 1742 (2020). DOI: 10.1016/j.jmrt.2019.12.005
- C.L. Chu, R.M. Wang, T. Hu, L.H. Yin, Y.P. Pu, P.H. Lin, S.L. Wu, C.Y. Chung, K.W.K. Yeung, P.K. Chu. Mater. Sci. Eng. C 28, 1430 (2008). DOI: 10.1016/j.msec.2008.03.009
- L.L. Meisner, A.B. Markov, V.P. Rotshtein, G.E. Ozur, S.N. Meisner, E.V. Yakovlev, V.O. Semin, Yu.P. Mironov, T.M. Poletika, S.L. Girsova, D.A. Shepel. J. Alloys Compd. 730, 376 (2018). DOI: 10.1016/j.jallcom.2017.09.238
- S.N. Meisner, E.V. Yakovlev, V.O. Semin, L.L. Meisner, V.P. Rotshtein, A.A. Neiman, F. D'yachenko. Appl. Surf. Sci. 437, 217 (2018). DOI: 10.1016/j.apsusc.2017.12.107
- L.L. Meisner, V.P. Rotshtein, V.O. Semin, A.B. Markov, E.V. Yakovlev, S.N. Meisner, D.A. Shepel, A.A. Neiman, E.Yu. Gudimova, F.A. D'yachenko, R.R. Mukhamedova. Mater. Charact. 166, 110455 (2020). DOI: 10.1016/j.matchar.2020.110455
- L.L. Meisner, V.P. Rotshtein, V.O. Semin, S.N. Meisner, A.B. Markov, E.V. Yakovlev, F.A. D'yachenko, A.A. Neiman, E.Yu. Gudimova. Surf. Coat. Technol. 404, 126455 (2020). DOI: 10.1016/j.surfcoat.2020.126455
- V.O. Semin, M.G. Ostapenko, L.L. Meisner, F.A. D'yachenko, A.A. Neiman. Appl. Phys. A 128, 1, 664 (2022). DOI: 10.1007/s00339-022-05815-3
- A. Bahrami, J.P. Alvarez, O. Depablos-Rivera, R. Mirabal-Rojas, A. Ruiz-Ramirez, S. Muhl, S.E. Rodil. Adv. Eng. Mater. 20, 1, 1700687 (2017). DOI: 10.1002/adem.201700687
- T. Burgess, M. Ferry. Mater. Today 12, 24 (2009). DOI: 10.1016/S1369-7021(09)70039-2
- W. Guo, E. Jagle, J. Yao, V. Maier, S. Korte-Kerzel, J.M. Schneider, D. Raabe. Acta Mater. 80, 94 (2014). DOI: 10.1016/j.actamat.2014.07.027
- J. Pfetzing, M.F.-X. Wagner, T. Simon, A. Schaefer, Ch. Somsen, G. Eggeler. ESOMAT, 2009, 1, 06027 (2009). DOI: 10.1051/esomat/200906027
- W. Ni, Y.-T. Cheng. Appl. Phys. Lett. 82, 1, 2811, (2003). DOI: 10.1063/1.1569984
- M. Mohri, M. Nili-Ahmadabadi, J. Ivanisenko, R. Schwaiger, H. Hahn, V.S.K. Chakravadhanula. Thin Solid Films 583, 245 (2015). DOI: 10.1016/j.tsf.2015.03.057
- G. Pan, Z. Cao, J. Shi, M. Wei, L. Xu, X. Meng. Sens. Actuators 217, 75 (2014). DOI: 10.1016/j.sna.2014.06.019
- W.C. Oliver, G.M. Pharr. J. Mater. Res. 19, 3 (2004). DOI: 10.1557/jmr.2004.19.1.3
- Q. Kan, W. Yan, G. Kang, Q. Sun. J. Mech. Phys. Solids 61, 2015 (2013). DOI: 10.1016/j.jmps.2013.05.007
- Yu.V. Milman. J. Phys. D 41, 1, 074013 (2008). DOI: 10.1088/0022-3727/41/7/074013
- Y. Ye, Z. Liu, W. Liu, D. Zhang, Y. Wang, H. Zhao, X. Li. RSC Adv. 8, 5596 (2018). DOI: 10.1039/C7RA12409K
- Patent 2017137653/15(065731) The Russian Federation, MPK A61L 27/06, B82B 1/00, C22C 45/10, A61L 31/18, C22C 45/04, C23C 28/00. Method for synthesis of a radiopaque surface Ti-Ta-Ni alloy with an amorphous or amorphous-nanocrystalline structure on TiNi alloy substrate, L.L. Meisner, A.B. Markov, G.E. Ozur, V.P. Rotshtein, S.N. Meisner, E.V. Yakovlev, E.Yu. Gudimova, V.O. Semin, Patent holder ISPMS SB RAS, IHCE SB RAS, Publ. 11.04.18 (in Russian).
- A.R. Dujovne, J.D. Bobyn, J.J. Krygier, J.E. Miller, C.E. Brooks. J. Arthroplasty 8, 7 (1993). DOI: 10.1016/s0883-5403(06)80102-6
- N. Soro, H. Attar, E. Brodie, M. Veidt, A. Molotnikov, M.S. Dargusch. J. Mech. Behav. Biomed. Mater. 97, 149 (2019). DOI: 10.1016/j.jmbbm.2019.05.019
- G.E. Ozur, D.I. Proskurovsky. Plasma Phys. Rep. 44, 18 (2018). DOI: 10.1134/S1063780X18010130
- M.G. Ostapenko, V.O. Semin, F.A. D'yachenko, A.A. Neiman, L.L. Meisner. Acta Mater. 231, 117893(1) (2022). DOI: 10.1016/j.actamat.2022.117893
- T.C. Hufnagel, C.A. Schuh, M.L. Falk. Acta Mater. 109, 375 (2016). DOI: 10.1016/j.actamat.2016.01.049
Подсчитывается количество просмотров абстрактов ("html" на диаграммах) и полных версий статей ("pdf"). Просмотры с одинаковых IP-адресов засчитываются, если происходят с интервалом не менее 2-х часов.
Дата начала обработки статистических данных - 27 января 2016 г.